HEITRO PE pedal boat HDL-420
Standard export packing, soft packing or as required
within 15 days
one year warranty, professional after-sale service and lifelong free technical support.
30% T/T as deposit, and the balance paid by T.T before shipment or L/C at sight. Western Union, Escrow
Qingdao, Yantai, Shanghai or other Chinese main port
Rotationally molded polyethylene hull, seats, rudder, steering handle and drive units: rugged and impact resistant
Molded-in keels: stable tracking and propeller protection
Positive floatation: cast in foam
Generous freeboard: deflects waves and spray
PEDAL DRIVE SYSTEM
Propeller powered: quiet and efficient
Bicycle cranks and axle: proven reliability
Roller bearings: smooth easy pedaling
All of the pedal boats feature a smooth, quiet drive system, giving effortless forward movement using conventional bicycle-type pedaling. Stopping and reverse movements are accomplished by reverse pedaling.
My drive belt appears to be loose. How do I tension it?
Note that you can also refer to your Owner’s Manual:
Find the adjustment nut on the threaded rod underneath the drive unit. It is on the bow (front) side of the drive unit.
Loosen the retaining screw and turn the nut clockwise a turn or two. This should loosen the nut.
Turn the adjustment nut counter clockwise until it just starts to feel tight (This is the proper adjustment for belt tensioning; increased tightening of the nut will over-tension the belt and ultimately cause problems.).
Tighten the thumb set screw – this does not need to be over-tightened either as it only has to keep the nut from turning.