What do you need to do to repair fishing boats?

- May 10, 2019-

Small holes or small holes with a fishing boat surface area of less than 1/2 inch can be filled with a disc with a diameter of at least 3 inches. It should be noted that the surface of the wafer and the vessel should be dry and clean. The gas in the fishing boat should be released first, so that the small area can be cut or torn to the ground, and then the hull and the wafer are evenly coated. For the upper three layers of adhesive, apply a layer of adhesive before applying the adhesive. Wait for five minutes and then apply a layer.

Power Family Pedal Boat

After three layers, it is about fifteen minutes. The disc sticks to the damaged part of the ship. Use a hair dryer to align the circle. The sheet is heated and blown, and after the adhesive is softened, the disc can be rolled several times with a broken flat round bar to ensure a firm bond between the wafer and the fishing boat.

The above is the knowledge that the fishing boat's small series brings to everyone, I hope to help you.