Electric Water Pedal Boats is the latest style of our boats at the end of 2018. PE hull and brand motor extended product life. The hull is guaranteed for three years and the motor is guaranteed for one year, which can bring you more profits. The most important is Tourists can pedal, listen to music and have something to drink on the boat, don’t feel bored. If Tourists are tired, they can choose to move forward by motor. The wide inner space give people a free and comfortable travel on boat. In this era, people who pay more attention to spiritual enjoyment than life. Amusement equipments will be more and more popular, take the opportunity to contact us!!!
My drive belt appears to be loose. How do I tension it?
The proper tensioning is as follows (note that you can also refer to your Owner’s Manual):
Find the adjustment nut on the threaded rod underneath the drive unit. It is on the bow (front) side of the drive unit.
Loosen the retaining screw and turn the nut clockwise a turn or two. This should loosen the nut.
Turn the adjustment nut counter clockwise until it just starts to feel tight (This is the proper adjustment for belt tensioning; increased tightening of the nut will over-tension the belt and ultimately cause problems.).
Tighten the thumb set screw – this does not need to be over-tightened either as it only has to keep the nut from turning.
I have made all of the above adjustments and am still having problems with my drive belt skipping. What should I do next?
Contact us for further directions. If need be, you can return the drive unit to us and we will rebuild it with replacement parts. If the boat is past warranty there will be a fixed charge for a rebuild; the cost of a replacement belt is not included in this charge.
How often will the belt need to be replaced?
The average life span of a drive belt is 1-2 years. Belts rarely fail completely and a new belt can be carried in the boat and replaced on the water with no tools needed.
We suggest keeping the extra belt in a sun-proof package, not a clear plastic bag.
Sometimes, if the belt has been stretched for a long time by overtightening, taking it off and turning it around helps. You can take the belt off and put it back on without taking the drive unit out of the boat.
How do I get back to shore if my belt breaks?
In that unlikely event there are two possible answers – carry a spare belt(easily replaced in about a minute) and always carry a paddle for emergencies (our recommendation here).
My boat is sitting very low in the water - what's wrong?
You may have water in the bilge (pump bilge pump to remove water). Or you may have water in the keel cavity ( remove boat from water, drain keels).